Limited-time discounts on EPA-approved wildfire air quality monitoring equipment

Trusted by the EPA to deliver accurate, real-time air quality data when it matters most, Clarity’s solar-powered, wildfire-ready air pollution sensors are the only professional-grade air monitoring solution featured on the U.S. EPA’s Fire & Smoke Map. In recognition of our inclusion on the map, our Fire & Smoke Promotion offers limited-time discounts on our air quality monitoring equipment.

The only professional-grade air monitoring solution on the EPA’s Fire & Smoke Map

As wildfires grow in frequency and intensity, Clarity’s Node-S stands alone as the only professional-grade air quality sensor trusted by the EPA’s Fire & Smoke Map to help agencies, cities, and schools protect public health during wildfire events. With our Fire & Smoke Promotion, we are offering limited-time discounts on our air quality measurement equipment.

EPA-validated & wildfire-proven air quality measurement

Don’t rely on consumer gadgets to protect your community during wildfire events – get the proven, EPA-validated solution for wildfire smoke monitoring. Clarity is purpose-built to tackle wildfire smoke, unlike other low-cost sensors that often lose accuracy in heavy smoke and harsh conditions.

When facing wildfire smoke, Clarity’s air quality monitoring solutions help you provide faster response, better data for decision-makers, and peace of mind for communities. Whether you’re a tribal air quality program looking to fill coverage gaps, a school district safeguarding students, or a county air agency augmenting your network, Clarity has done it before – and we’re ready to help you do it next.

Learn about Clarity discounts!

Why Clarity for wildfire air pollution monitoring?

Rugged & Low Maintenance for Remote Deployment

Built for professional use outdoors, Clarity devices are weatherproof, durable, and require virtually no maintenance or manual calibration. Deploy them anywhere in minutes, without headaches — no downtime, just continuous data. Unlike hobby sensors that need frequent maintenance, our Node-S monitors are solar-powered and cellular-connected, so they keep reporting through smoke, heat, and dust during wildfire emergencies when power or WiFi infrastructure may fail.

EPA-Validated Accuracy for Wildfire Smoke

Clarity’s sensors use advanced calibration and QC to maintain accuracy even in extreme smoke conditions. While consumer sensors can overestimate pollution or vary device-to-device during wildfires, Clarity Nodes are expertly calibrated and field-validated by the EPA to meet performance targets during wildfire smoke events. In fact, Clarity developed a specialized wildfire calibration model for the EPA FASM to ensure readings stay reliable even at very high AQI levels. With Clarity, you get actionable data you can trust when air quality reaches hazardous levels.

Modular Platform for Multi-Pollutant Insight

Clarity’s modular air monitoring platform goes beyond basic particle counts. The Node-S measures PM2.5 and NO₂ and can be expanded with the Black Carbon, Multi-Gas, and Wind Add-on Modules (see bundles below) to fully characterize wildfire smoke. Modules integrate seamlessly with the Node-S, giving you the flexibility to adapt your air quality monitoring network to changing air pollution conditions—providing a complete picture of smoke impacts that single-purpose sensors can’t match.

Real-Time Air Pollution Data & Alerts

All Clarity data feeds into our cloud Dashboard in real time, with the option to share data publicly using a custom iteration of our OpenMap data sharing platform with your organization’s branding (free for a limited time!). WIth our our AQ Alarms and OpenMap email notification features, you can alert your community instantly when conditions worsen. No more waiting for hourly data from reference monitors – Clarity delivers up-to-the-moment data to inform decisions (school closures, public alerts, etc.).

Featured on EPA’s Fire & Smoke Map

In January 2025, as devastating wildfires struck Los Angeles, over 200 Clarity sensors across the LA metro were rapidly integrated into the EPA’s official Fire & Smoke Map. The EPA team fast-tracked Clarity’s inclusion because our data passed preliminary accuracy tests and dramatically improved coverage in smoke-impacted areas. Clarity is the only professional-grade sensor platform included on the Fire & Smoke Map. This EPA validation gives you confidence that Clarity’s data meets rigorous standards during wildfire events.

Proven in Real-World Wildfire Response

Clarity has been battle-tested in major wildfire incidents, from Boulder, Colorado, to San Francisco, California. During the January 2025 Southern California wildfires, LAUSD’s Clarity network provided critical real-time PM2.5 readings and AQI updates as smoke choked the region. Emergency responders and the public relied on Clarity’s sensors to guide school closures, health warnings, and evacuation decisions – real-world proof of performance under pressure.

Request a quote!

Clarity vs. other sensors 
on the Fire & Smoke Map

Other Sensors
Affordable MonitoringAffordable annual subscription
Cheap hardware purchase
Pollutants Measured
PM, NO2. Black Carbon, Ozone, Met available
PM only
Cellular Connectivity
Integrated global cellular (3G/4G)
WiFi required
Solar Powered Design
Integrated solar, deploy anywhere
Line power required
Data Ownership
Customer own all data produced by Clarity Nodes
PurpleAir owns (and sells) all data produced
Data Accessibility
Clarity Dashboard, REST API, and OpenMap
Data access through PurpleAir map & REST API
Data Calibration
Calibrated data for accurate, consistent measurements
Raw data that may require calibration for accuracy
Project Support
Expert project support and managed service
Not provided, user-supported community forums
Network Scalability
Adaptable and designed for deployment at scale
Limited by need for power and WiFi
Minimal Maintenance
Minimized maintenance, monitor device status on Dashboard
Frequent onsite maintenance required
Hardware Warranty
Free device replacement under warranty throughout subscription
Limited 1-year warranty
Get in touch with Clarity!

“With other low-cost sensors we had to set up each monitoring location with power and WiFi connectivity, and the data was a mess. The best thing I can say about Clarity is the reduction of effort by our air monitoring staff. Very little hands-on work is required to operate the equipment, which is a real benefit. It’s implemented quickly and we can start streaming the data immediately.”

Air Monitoring Manager

at a regional Air Resources District

”Clarity devices worked well and the data was much better than  PurpleAir — Clarity pays attention to and cares about getting accurate data.”

President & CEO of an NGO

“With Purple Air we had to try to set up monitoring location with power and WiFi connectivity, and the data was a mess. The best thing I can say about Clarity is the reduction of effort by our air monitoring staff. Very little hands - on work is required to operate the equipment, which is a real benefit to the District. It’s implemented quickly and we can start streaming the data immediately.”

Air Monitoring Manager

at a regional Air Resources District

Wildfire monitoring packages: Limited time discounts!

To celebrate our inclusion on the Fire & Smoke Map, we’re offering discounted pricing on Clarity’s wildfire air quality monitoring solutions. These bundles combine our core Node-S air quality monitor with wildfire-specific Add-on Modules and software tools – everything you need to track smoke and protect your community.

Black Carbon Module

Distinguish wildfire smoke from other urban air pollution sources

Wildfire smoke isn’t just PM2.5 – it has a unique signature. Our Black Carbon Module identifies the sooty black carbon within particulate matter, using 5-wavelength optical analysis. This helps you tell apart biomass smoke vs. other pollution sources. For example, if haze is coming from a wildfire, black carbon levels will spike differently than if the haze were from local traffic.

Use Case: A regional air district can deploy the Black Carbon Module to confirm that elevated PM is due to wildfire smoke (rich in black carbon) and not an industrial source, informing appropriate health advisories.

Get Discounted Pricing!

Multi-Gas Module

Measure carbon monoxide & ozone to evaluate smoke chemistry

Wildfires don’t only create particles; they also emit gases that impact health. The Multi-Gas Module adds sensors for CO and O₃ (carbon monoxide and ozone) – two key pollutants during fires. CO is a direct tracer of wildfire smoke; high CO readings mean a fresh smoke plume is present (indicating danger even if particles are not visible). Ozone can surge on sunny days downwind of wildfires due to chemical reactions in the smoke. By monitoring both, you get a more complete picture of air quality.

Use Case: A school district can use the Multi-Gas add-on to know if outdoor CO is creeping up from nearby wildfires (a sign to keep an eye on indoor air quality), and if outdoor ozone is reaching levels that trigger asthma warnings

Get a Quote!

Wind & Met Module

Track wind speed & direction to better predict spread and improve forecasts

Understanding where smoke is coming from and where it’s heading is crucial in wildfire events. The Wind & Meteorological Module plugs into the Node-S to measure local wind speed and direction, plus environmental conditions. This lets you correlate pollution spikes with wind shifts – essentially pinpointing the source and trajectory of smoke.

Use Case: A tribal air program might deploy Wind Modules with their sensors around a reservation. When a wildfire ignites nearby, they can see that “smoke levels are rising at the east sensor when winds blow from the east” – confirming the fire’s impact and helping predict which communities will be hit next.

Get a Limited Time Offer!

OpenMap Plus

Build a custom-branded, public-pacing wildfire air quality map

During wildfire season, transparency and public information are vital. OpenMap Plus is our cloud software feature that lets you instantly publish your air pollution sensor readings to a public map or website with custom branding. In an emergency, you can share an easy link with residents so they see real-time air quality in their neighborhood (without needing to interpret complex data). OpenMap Plus also provides simple tools for community engagement – embed the map on your site, add briefing notes, and notify your constituents in real time with email alert subscriptions.

Use Case: A regional air district creates a public OpenMap page showing all its Clarity sensors, so during a wildfire, residents can zoom into their town and see current smoke levels and health messages. This builds trust and helps people make decisions (evacuate, stay indoors, etc.) based on live local data.

Get a Quote!

A complete air quality monitoring ecosystem

Clarity provides everything you need to get started with air quality monitoring, with a suite of hardware solutions built around the Node-S — our solar-powered and MCERTS-certified air quality sensor.

Stackable Modules attach in seconds, making it easy to upgrade your air monitoring network to measure additional air pollutants over time.

Get a quote!
Clarity Sensing-as-a-Service Air Quality Monitoring Solutions

Trusted for real-world wildfire monitoring by air quality leaders

Don’t just take our word for it – leading organizations across North America are already using our air quality monitoring equipment to guard against wildfire smoke. Here are a few examples of how our customers have deployed Clarity for wildfire monitoring:

Eddie Ahn

Executive Director, Brightline Defense

"Clarity was our first-choice air quality monitoring provider for several reasons. We enjoyed working with the Clarity team - they are highly knowledgeable and always responsive. The Node-S devices themselves are also incredibly resilient, which was especially important for us when deploying the monitors in emergency conditions during the wildfire events this past year."

Bill Hayes

Air Quality Program Coordinator, Boulder County Public Health

"After the Marshall fire we installed a total of 22 monitors in the burn area. The Node-S is solar powered, has impressive battery-life and transmits data via cellular network. That means we could put these monitors anywhere that the sun shines and that you can make a cell call."

William Chevalier

Supervising Air Monitoring Specialist, Monterey Bay Air Resources District

"We were excited when we saw what Clarity was offering — it works very nicely for our objectives with the wildfire air monitoring network. We liked that Clarity’s sensors are very quick to install and very easy to use, thanks to the native solar panel and cellular antenna. Not having to use somebody else's WiFI in a remote location is great — that had been a major issue for us with several projects.”

Richard Stedman

Air Pollution Control Officer at the Monterey Bay Air Resources District

"We don’t have a lot of staff time to spend setting up or fine-tuning this equipment — Clarity’s managed service model allows us to multiply the number of sensors in our network with minimal additional overhead on our end. We're going from six particulate matter monitors to more than 20 — with one placed in each local municipality — so we expect to have more granularity in looking at how smoke impacts people across our three-county jurisdiction."

Michael Ogletree

Air Quality Technical Services Program Manager at the DDPHE

"Clarity provided an off-the-shelf solution that was easy to deploy. Clarity Nodes are easy to set up and after reviewing a co-location we had in place, the data was in line with our expectations. The flexibility in changing the data capture rate was key — I was able to remotely configure the nodes to collect data at a higher or lower resolution as needed."

Learn about Clarity discounts!
Case Study

Los Angeles Unified’s Air Monitoring Network During the 2025 Los Angeles Wildfires

With smoke-related air pollution spreading rapidly and unpredictably during the devastating Los Angeles wildfires of January 2025, the Los Angeles Unified Air District turned to its network of 200+ Node-S air quality sensors in its Know Your Air Network for real-time, local data on air pollution levels. This allowed LAUSD leadership to keep students safe from the severe health impacts associated with wildfire smoke, which are particularly harmful for vulnerable populations like children.

In addition to sharing data on the EPA’s Fire & Smoke Map, Clarity’s OpenMap provided another useful tool for visualizing the spread of air pollution at school locations across the district.

Get a quote today!

Get Started – Protect Your Community
from Wildfire Smoke

Ready to take the next step? Don’t wait until the smoke arrives to plan your wildfire air quality monitoring strategy. Clarity’s Fire & Smoke Promotion offers everything you need to prepare now and ensure you have reliable data all season long.

Get in touch with our team of experts – we’ll advise you on the right solution (whether it’s one of the bundles above or a custom package) and help you deploy quickly.